Humidity temperature transmitter is distinguish between both temperature & transmitters which are very much important for measuring this electronics equipment with humidity and temperature in both status application of indoor and outdoor. Relatively used some major humidity transmitter across the unknown measuring part is also suitable for unique type of measurement in finding those air ducts and can also be available toward desired section with similar display system that could shows both in measurement reading(Humidity transmitter and temperature transmitters).
The Series HF4 are suitable for the measurement of relative humidity and temperature in indoor and outdoor applications and also suitable for the measurement of dew/frost point. HF4 humidity sensor are available with ±1%rh/±0.2k accuracies. This series has Automatic sensor test & drift compensation. It has a Records up to 2,000 measurement pairs and we can use this transmitter as a simulator for system validation for any electronics series. Series HF4 is used in common phase that available with UART service interface could get integrated with sensor and can Adjusted at 23°C, 10,35,80%rh as well it can be mounted on a DIN rail.
Humidity Temperature Transmitter (HTTP) ER WITH RS485 INTERFACE (MODEL HTX-3000) are available with Microcontroller based design in which Input of this microcontroller for T and %RH from Rotronic in some saturation build with different make of Hygroclip S3 and Isolated 4-20mA which is quite proportional and linearized for both T and RH. ER WITH RS-485 INTERFACE (MODEL HTX-3000) are available with RTU serial interface and 4-20mA retransmission output for both T and RH. this model has bright red LED display and IP 65 ABS plastic enclosure that operates on 12 to 36VDC.
XB-32 series is mixture of humidity temperature transmitter with a specific application. It is good suited two major application such as drying systems and climatic chambers. XB-32 series are readily available either as a pcb and probe combination for fitting into the customer's own enclosures and can also be supplied in an industry standard IP65 case. This series provides the linear output of 4. 20mA or 0.10 V with the help of power supply of 10.35 VDC or 12.24 VAC and as well it can be generated with digital DIO signal. Temperature measurement is by primary connection to a Pt 100 relying on the consumer requirement. XB-32 is a compensation system for operation over a wide -50 and it is a great featured of this series. The accuracy range of this series is 200 C with incorporated cable length compensation. It means that whatever the measurement temperature or the differential in temperature between sensors and electronics, but it is sure about the optimum results will be obtained.
The Series HF4 are suitable for the measurement of relative humidity and temperature in indoor and outdoor applications and also suitable for the measurement of dew/frost point. HF4 humidity sensor are available with ±1%rh/±0.2k accuracies. This series has Automatic sensor test & drift compensation. It has a Records up to 2,000 measurement pairs and we can use this transmitter as a simulator for system validation for any electronics series. Series HF4 is used in common phase that available with UART service interface could get integrated with sensor and can Adjusted at 23°C, 10,35,80%rh as well it can be mounted on a DIN rail.
Humidity Temperature Transmitter (HTTP) ER WITH RS485 INTERFACE (MODEL HTX-3000) are available with Microcontroller based design in which Input of this microcontroller for T and %RH from Rotronic in some saturation build with different make of Hygroclip S3 and Isolated 4-20mA which is quite proportional and linearized for both T and RH. ER WITH RS-485 INTERFACE (MODEL HTX-3000) are available with RTU serial interface and 4-20mA retransmission output for both T and RH. this model has bright red LED display and IP 65 ABS plastic enclosure that operates on 12 to 36VDC.
XB-32 series is mixture of humidity temperature transmitter with a specific application. It is good suited two major application such as drying systems and climatic chambers. XB-32 series are readily available either as a pcb and probe combination for fitting into the customer's own enclosures and can also be supplied in an industry standard IP65 case. This series provides the linear output of 4. 20mA or 0.10 V with the help of power supply of 10.35 VDC or 12.24 VAC and as well it can be generated with digital DIO signal. Temperature measurement is by primary connection to a Pt 100 relying on the consumer requirement. XB-32 is a compensation system for operation over a wide -50 and it is a great featured of this series. The accuracy range of this series is 200 C with incorporated cable length compensation. It means that whatever the measurement temperature or the differential in temperature between sensors and electronics, but it is sure about the optimum results will be obtained.
You May Also Like:
0 comments:
Post a Comment